The Yamaha YST-SW012 is a subwoofer designed to trigger the sound from the front. Cube-shaped and the cone, with a diameter of 20 inches, are protected behind a grid web. The enclosure is solid and is made of Medium-density fibreboard (MDF). He is an active speaker, with its own built-in amplifier with an output of 100 watts. It has a technology developed by the brand, called Advanced YST (Yamaha Active Servo Technology) which allows the speaker and amplifier work together to cancel impedance so the speaker provide a linear response. Yamaha YST-SW012 has a bass port on the side.
Being an integrated loudspeaker amplifier generates heat during operation; more heated part which is the rear panel. It is advisable to place it away from walls and furniture. It comes either leave a distance of at least eight inches by both sides as above and behind. It is also best to avoid covering the rear panel with any material; for example, be careful with the curtains. Nor is it good idea to place objects on the subwoofer, or figurines, or candles. Furthermore Yamaha YST-SW012 has a frequency range from 28 Hz to 200 Hz.
The back has a power indicator light showing a light to see when the switch is on. Apart from the switch there is also a volume control wheel that works in the sense clockwise to increase the level. The manufacturer advises adjust the volume level on the position of the half when Yamaha is part of a theater multichannel home.
Before using the subwoofer for the first time, adjust the balance between the subwoofer and front speakers system. The first is to put the volume knob to the minimum. Then you need to turn the other components. Then you need to turn this switch Yamaha. Next is to reproduce a rich source of low frequency, adjust the volume control of the amplifier to the desired listening level. The next step is to slowly turn the volume knob to balance the balance between the subwoofer and the other speakers in the system; the ideal is to keep it at a level where virtually indistinguishable. Finally, the volume of the entire system is set in the amplifier.
The manufacturer recommends disconnecting the plug before changing this speaker location, like audio cables. Also, if you are not going to use for a long period of time, such as during the holidays should be left unplugged from the electrical outlet. Yamaha YST-SW012 is available in three colors: silver gray, black and a combination of black and orange. Inside the package is an audio cable with a length of five meters and four anti-slip adhesive pads. When lit consumes 45 watts. It weighs 8.5 kilos and measures 290 by 290 and 328 millimeters. The Yamaha YST-SW012 is distributed in our country at a retail price of 100 euros.
Yamaha YST-SW012 active subwoofer cube-shaped
No comments:
Post a Comment