The projector Epson EH-LS10000 sports a very sleek original design, combining simplicity and elegance. The special feature of this projector is the use of a dual laser as a light source. The result is deep blacks, a wider range of colors (full range of sRGB color even in dynamic mode, thanks to the cinema filter, it is possible to obtain color ranges DCI and Adobe RGB), a brightness of 1500 film and especially a life announced at 30,000 hours in economy mode, is much more substantial than the usual lamps. The use of these lasers also allows time-voltage under very short (20 seconds).
Technically speaking, the EH-LS10000 is a 1080p projector Tri- LCD reflective (0.74 “R-HTPS). However, it incorporates a process that simulates the 4K display with 1080p content through very rapid shaking of the matrix, improving sharpness and resolution. This is akin to the nodulation technology used by JVC with its E-Shift. There is also a 3D compatibility, better brightness in 3D mode 2D to 3D conversion and control of the depth of the effect. Its display is announced at 240 Hz native.
The EH-LS10000 also has an ISF calibration mode, image interpolation system and Super Resolution mode to enhance the sharpness in the simulation 4K. Furthermore, this projector has a motorized lens (Lens shift) with a displacement of +/- 90% vertical and +/- 40% horizontal, and a 2.1x zoom position memory (up to 10 pre- configurations ). The connector has two HDMI inputs (one MHL), a component video input, RGB input and a USB port. This projector generates a noise level of 19 dB in eco mode and 28dB in standard mode, is very quiet. Finally, Epson has built a network feature that sends error reports to a predefined email address.
Technical specifications of the projector Epson EH-LS10000:
- 3D laser projector 1080p
- 3LCD Reflective (0.74 R-HTPS devices)
- New dual laser light source
- The most complete range of color Epson (full color gamut sRGB even in dynamic mode, thanks to the cinema filter, it is possible to obtain color ranges DCI and Adobe RGB)
- Image enhancement technology and Super Resolution Technology
- Enhancement technology 4K
- Full HD 1080p and 3D compatible
- Brightness: 1500 lm
- Motorized movement of the target +/- 90% vertical and +/- 40% horizontal and zoom of 2.1x motorized lens
- High aperture ratio for smooth images and effect “screen door” reduced
- ISF calibration
- 3D formats: Top-and-Bottom, Side-by-Side Frame Packaging
- Image interpolation
- Laser light source for long life time of 30 000 hours
- Technology start / stop for instant startup and launch of the projection in 20 seconds
- Lens position memory (up to 10 preset configurations)
- Low fan noise (19 dB eco / 28 dB typical)
- A network feature sends error reports to a predefined email address
- 2 x HDMI inputs (1 x MHL), 1 x component video input, 1 x RGB input, 1 x USB A, 1 x RS232, 1 x Trigger
- Remote control
- Dimensions: 553 x 550 x 238 mm
- Weight: about 18kg
The Epson EH-LS10000 will be available from April 1, the indicative price of € 6,999.
Epson EH-LS10000: Laser projector 1080p with 4K simulation
No comments:
Post a Comment